Optibelt KB RED POWER 3 kraftbands consist of wrapped optibelt RED POWER 3 V-belts which are joined together with a highly wear-resistant top surface. This compact drive element is primarily used with extreme impact loads, long centre distances and vertical shafts.

The wear resistant cover fabric, the high quality rubber compound and the special low stretch polyester cord withstand high dynamic loading and maintenance free drives. If several kraftbands are used per drive, matched sets must be used

The Optibelt BLUE POWER 2 is a high-performance wedge belt with high-flex aramid tension cord.

In combination with our special cover fabric, its flexibility is increased. At the same time, all the belt parts used are protected from external influences (such as dust or abrasion).

The superstructure and substructure consist of a high-performance ethylene propylene compound (EPDM), reinforced with transverse fibres. This makes it possible to achieve a higher power transmission capacity.

This increased power transmission capacity makes the optibelt BLUE POWER 2 suitable even for heavily loaded drives, such as in heavy-duty mechanical engineering applications.

With the optibelt BLUE POWER 2, an efficiency of 97% is achieved.

Optibelt SUPER KBX-POWER kraftbands are made up of optibelt SUPER X-POWER V-belts and are joined together with a top surface which is highly resistant to wear and tear. optibelt SUPER KBX-POWER kraftbands display a tension behaviour which is significantly more favourable than with conventional raw edge kraftbands. These kraftbands are used with up to five ribs or as a combination of sets.

optibelt SUPER KBX-POWER kraftbands are recommended for use with extreme impact loads, vertically running axes, large centre distances and many other special tasks in the field of mechanical and vehicle engineering. The performance ratings correspond to the sections of optibelt SUPER X-POWER V-belts.

Optibelt KB SK kraftbands consist of high-quality wrapped single V-belts which are joined together with a top surface. Depending on the application, up to five wedge belts may be used per kraftband. In special cases, kraftbands with more than five V-belts can be supplied.

If several kraftbands are used per drive, combinations of sets are necessary. optibelt KB SK kraftbands are used above all for extreme shock loads or large centre distances in conjunction with small pulley diameters and with vertical shafts.

Optibelt KB VB kraftbands consist of high-quality single V-belts which are joined together with a top surface. Depending on the application, up to five classic V-belts may be used per kraftband. In special cases, kraftbands with more than five V-belts can be supplied. If several kraftbands are used per drive, matched sets must be used.

optibelt KB VB kraftbands are used above all with extreme shock loads or large centre distances in combination with small diameter pulleys and with vertical shafts.

Optibelt AGRO POWER kraftbands consist of wrapped V-belts which are joined together with a highly wear-resistant top surface.

This compact drive element is primarily used with extreme impact loads, long centre distances, vertical shafts and coupling drives.

The wear-resistant cover fabric, the high-quality rubber compound and the special low-stretch tensile cord ensure high dynamic loads and low-maintenance drives.